 |
Kiln Accessories & Repair Parts |
|
|
|
Kiln Accessories & Repair Parts |
|
| Orton KilnVents: DISCONTINUED. Replaced by Orton Vent | Element Wiring | |||||
| Master Kiln Vent prices below effective until stock is cleared.. | ||||||
| PVST1,2 | Stand Version | $395.00 | PWS14 | 14g SEW-2 (200oC) wire | $2.25/m | |
| PVST3,4 | Stand Version, 23.5" | $395.00 | PWS12 | 12g SEW-2 (200oC) wire | $2.75/m | |
| PVSU1,2 | Suspended Version | $395.00 | PWT18 | 18g TEW (105oC) wire | $.50/m | |
| PVKM1,2 | KilnMount Version | $395.00 | PETB1 | Terminal block, 3 pole, 70 A | $6.00 | |
| PVP11,2 | PlateMount Version 18" | $395.00 | Compression Connectors: | |||
| PVP21,2 | PlateMount Version 24" | $395.00 | PCNCS | for up to 14g wire | $.50 | |
| PVJU1,2 | Junior Version | $395.00 | PCNCL | for 12-6g wire | $.85 | |
| PVFM1,2 | FloorMount Version (one kiln) | $395.00 | For push on type switch terminals, or for Kiln Sitter terminal | |||
| PVFMX | Floor Mount Version (kit to add 2nd kiln) | $78.00 | blocks (many styles available). | |||
| PVM1X | New! Vent Master, replaces all KilnVents | $395.00 | PE4SL | Element connector, 4 screw large | $6.13 | |
| PE2SL | Element connector, 2 screw large | $3.85 | ||||
| Pyrometers and Kiln Sitters | PE2SS | Element connector, 2 screw small | $3.85 | |||
| PP200 | 0-2000oF/1100oC analogue scale | $95.31 | PEISH | Element connector, 1 screw HD | $1.95 | |
| PP250 | 0-2500oF/1350oC analogue scale | $95.31 | PEISX | Element connector, 1 screw std | $1.43 | |
| PPTC1,2 | pkg w/ 14g t.c. & bracket | $129.00 | PELOW | Element leadout washer, 1" dia | $1.00 | |
| PPFD1 | 1999F/1300C digital scale pkg with 14g t/c | $79.00 | PELOT | Element leadout tube, 1.125" long | $1.85 | |
| PPFD2 | As above with dual inputs and two 14g t/cs | $109.00 | ||||
| Dawson Kiln Sitter, with tube assembly and manual. | Element Wire | |||||
| PSXX2 | Model P (with box) | $141.82 | PEPIS | Element pinning staple* | $ .40/ea | |
| PSXX3 | Model LT-3 (with box) | $205.09 | PEPIW | Element pinning wire, 12-*19G* | $3.50/m | |
| Most Kiln Sitter parts in stock. Call for prices. | ||||||
| Gauges 5 through 11 | $33.00/lb | |||||
| Switches & Miscellaneous | Gauges 12 through 19 | $36.00/lb | ||||
| Switches are available for all kiln models. Price includes knobs | ||||||
| unless otherwise shown | Lb prices are for quantities of less than 3 lb, less 25% for 3lb or | |||||
| PK3HT | 3-heat (Lo Med Hi), 220V, with knob | $41.98 | greater. Please inquire for pricing for full spool (+/- 40lb) or full | |||
| PKPA1 | Paragon 4-way, 110/220V, with knob | $81.19 | coil (+/- 70lb) quantities. | |||
| PKEV1 | On-off toggle (Evenheat) | $23.00 | Prices are for FeCrAl (i.e. Kanthal A-1). Other grades (i.e., nickel - | |||
| Infinite Heat Switches: | chrome 80 - 20) and gauges available. Please inquire. | |||||
| PKIH1 | 120V, with knob (no knob) | $30.90 | * Be sure that staples and elements are the same wire type. | |||
| PKIH2 | 240V, switch only (no knob) | $27.60 | ||||
| PKIHK | Knob | $4.92 | Brick Repair & Rigidizer | |||
| PR163 | Relay, 30A, 240V coil | $35.60 | RMOR2 | Firebrick mortar 500 mL jar | $10.87 | |
| PR161 | Relay, 30A, 12VDC coil | $28.67 | RMOR3 | 1 L jar | $18.00 | |
| PPECR | PSH peephole cover | $4.44 | RMORP | 55 lb pail | $88.40 | |
| PPEPG | Orton peephole plug | $6.00 | Use mortar to cement bricks together (thin joints only), or thin | |||
| with water to use as a wash. | ||||||
| Thermocouples & Accessories | RCEM2 | Orton brick repair cement | $10.80/lb | |||
| PTCAF | T/C 14g, type K, 6", t.c. only | $16.70 | Use Orton repair cement to patch brick, where a thick joint, or fill, | |||
| PTC2X | T/C 14g, type K, 6", w/ block & lead | $24.35 | is required. | |||
| PTCBL | Porcelain t/c block | $3.25 | RPUT2 | Repair putty 500 mL jar | $15.70 | |
| PTCCP | T/C 8g, type K, 12", 9", 6" | $24.85 | RPUT1 | Repair putty 11oz tube | $15.70 | |
| PTLAA | Leadwire type K, 20g, PVC | $2.20/m | Putty is soft and moldable; use to fill cracks, or to patch holes on | |||
| PTLBA | Leadwire type K, 20g, fibre | $3.83/m | the top of horizontal surfaces. | |||
| PTLCA | Leadwire type K, 20g, shielded | $2.78m | RRIG2 | Silica rigidizer 500 mL jar | $9.00 | |
| PTLDA | Leadwire type R/S, 20g, PVC | $3.25/m | RRIG3 | 1 L jar | $13.33 | |
| PTLFA | Leadwire type R/S, 20g, shielded | $3.65/m | RRIG4 | 5 L jug | $44.49 | |
| RVGDR | Prot. tube, 3/8 x 1/2 dia x 12" | $22.16 | Use rigidizer to harden the surface of blanket, or soak blanket, and | |||
| RVJDR | Prot. tube, 5/8 x 7/8 dia x 12" | $29.07 | dry, to make forms for glass slumping. Rigidizer can be thinned for | |||
| Many other thermocouples and parts are available, including types | most applications. | |||||
| R and S. Please call for more information. | ||||||
Return to Kiln Elements and Parts Page
