KILN FURNITURE

  

 
 
Kiln Shelves  New! Silicon Carbide   
Oxide Bonded   more info..  
Round - Cordierite-mullite   MSDS
  ( inches )       ( inches )
F7RXX 7 1/8 dia. x 3/16   $3.50 FS10X 10 x 24 x 1/2

Reduced!

 $48.00
F12RX 12 dia. x 1/2 $17.10 FS12X 12 x 24 x 1/2 Reduced! $50.00
F15RX 15 1/2 dia. x 1/2 $24.00 FS14X 14 x 28 x 1/2 Reduced! $76.00
F1512 Half 15 1/2 dia. x 1/2 $13.00 FS16X 16 x 24 x 1/2 Reduced! $76.00
F16RX 16 1/4 dia. x 1/2* $19.00 FS17X 17 x 23 x 1/2 Reduced! $76.00
F21RX 21 dia. x 3/4 $52.00 FS18X 18 x 28x 1/2 Reduced! $90.00
F21RX Half 21 dia. x 3/4 $27.00      
F26RX 26 dia. x 3/4 $80.00 New! Silicon Carbide 

F2612 Half 26 dia. x 3/4  $40.00 Nitride Bonded   more info..  
*95% cordierite   more info
    ( inches )
Square/Rectangular - Cordierite-mullite   MSDS FSN12 12 x 24 x 1/2

Reduced!

 $50.00
  (inches )   FSN13 13 x 26 x 1/2 Reduced! $68.00
F88xx 8 x 8 x 1/4 $8.00 FSN14 14 x 28 x 1/2 Reduced! $76.00
F1010 10 x 10 x 1/4 $12.00 FSN18 18 x 18 x 1/2 Reduced! $64.00
F1212 12 x 12 x 1/2 $20.00 FSN21 21 x 21 x 1/2 Reduced! $76.00
F1414 14 x 14 x 1/2 $24.00 FSN28 14 x 28 x 3/8 Reduced! $76.00
F1020 10 x 20 x 3/4 $32.00    
F1224 12 x 24 x 3/4 $50.00 New! Silicon Carbide
F1616 16 x 16 x 3/4 $44.00 Solid Posts 
F1818 18 x 18 x 3/4 $48.00   ( in inches )
F1326 13 x 26 x 3/4 $60.00 FSP2X 2 x  1 3/4 dia. $2.25
F1723 17 x 23 x 3/4 $62.00 FSP4X 4 x  1 3/4 dia. $4.50
F172T 17 x 23 x 1 $80.00 FSP6X 6 x  1 3/4 dia. $6.75
F2121 21 x 21 x 3/4 $72.00 FSP8X 8 x  1 3/4 dia. $9.00
F1828 18 x 28 x 3/4 $90.00 FSP10 10 x  1 3/4 dia. $11.25
Shelf cutting (high alumina only): $3 per cut FSP12 12 x  1 3/4 dia. $13.50
       
Kiln Wash (Kaolin + Alumina Hydrate)    MSDS Kiln Wash (Kaolin + Silica)    MSDS
VKNW2 500 g 3.75 RKNW3 1 kg $3.25
VKNW3 1 kg 6.50 RKNW4 5 kg $11.00
VKNW4 5 kg 25.00 RKNWB 15 kg $20.00
VKNWB 15 kg 37.81 VKNWB 15 kg $37.81
       
mRound Shelf Supports, 1 3/4" Dia.  (Recommended for cone 10)   MSDS
FRS12 1/2" $1.70  FRP5X 5" $3.00
FRP1X 1" $1.90  FRP6X 6" $3.50
FRP2X 2' $2.00 FRP8X 8" $4.80
FRP3X 3" $2.10 FRP10 10" $5.50
FRP4X 4" $2.50 FRP12 12" $6.00
           
mDouble Pointed Clay Stilts  (to cone 10) Wire Stilts                                      
FS01X 7/8" (01) $.42 FWS34 3/4" $.70
FS02X 1 1/2" (02) $.48 FWS2X 1" $.80
FS03X 2" (03) $.60 FWS3X 1 1/2" $.90
FS4XX 2 1/4" (4) $.42 FWS4X 2" $1.10
FS04X 2 1/2" (04) $.70 FWS6X 2 1/4" $1.20
FS05X 2 3/8" (05) $.81 FWS8X 2 3/4" $1.50
FS06X 3" (06) $1.20 FWS10 3 1/2" $1.70
FS07X 3 1/2" (07) $1.62 FWS14 5 1/2" $3.80
      FWSB3 3" Bar $1.40
Thimbles (to cone 10) Alone or nested, thimbles make good small shelf supports FWSB4 4" Bar $1.60
     
FTHIM   .75' dia. x 1" h $.25      
Back to Pottery Supplies
 New!  Cone 10 Plate Setter m mmmmmmm                          Modular Tile Rack mMortaring Required

  FPS12   Hi-Alumina $29.00       FTR4X        4" Rack (6 pcs)          $35.20
FSPSX  SiC   $29.00 FB4XX 4" Base or Top $5.20


Nitride bonded silicon carbide (resists glaze drips) or English high alumina. For plates up to 14" dia. & 1.5" high.  If left stacked, will accept plates  to 12.5" dia

 FTR6X 6" Rack (6 pcs) $45.60
FB6XX 6" Base or Top $6.80
FU12X 12-Tile Upright $7.00
FU15X 19-Tile Upright $8.00
RMOR2 500 mL Mortar $10.87
     
Back to Pottery Supplies
  Bead Rack

 

Extruded Tile Setters  

For non-vitreous clay bodies

 

 FBDRK   Rack w/ 6 10"wires $30.00

4" x 4" tile setter  11.25" w x 4.75" d x 12" h.  Holds 24 tile + 2 on top.

FRTS4                                               $25.00

 

 

6" x 6" tile setter    7.75" w x 6.25" d x 10" h.  Holds 9 tile + 1 on top.

FRTS6                                               $26.00
FBDWE Wire, metre $3.50
Cone 6 Plate Setter
FRS10   10" Rack $18.00
FRS15   15" Rack $25.00

E-MAIL