![[Home]](images/bhome.gif){kind=small}
![[Services]](images/bservs.gif){kind=small}
![[Search]](images/bsrch.gif){kind=small}
Clean, quiet, no hot spots, superior metal
Accurate control, easy to operate
Ceramic fiber lining, low mass, efficient
Elements supported on ceramic tubes
for optimum heat radiation
| MODEL 1 | RATING (kW) |
CAPACITY (kg Aluminum) |
MAXIMUM MELT RATE 2
(kg/h Aluminum) |
HOLDING LOSS (kWh/h at 750 C 3 ) |
CRUCIBLE (SiC) |
| CBF 10 CBF 10H |
15 20 |
25 25 |
30 45 |
2.5 2.5 |
BUC 35 BUC 35 |
| CBF 20 CBF 20H |
18 30 |
50 50 |
40 65 |
3 3 |
BUC 50 BUC 50 |
| CBF 40 CBF 40H CTF 40 |
24 40 24 |
100 100 90 |
50 90 55 |
3.5 3.5 3.5 |
BPC 100 BPC 100 BPC 100K |
| CBF 75 CBF 75H CTF 75 |
46 60 46 |
200 200 190 |
120 150 120 |
4 4 4 |
BPC 200 BPC 200 BPC 200K |
| CBF 130 CBF 130H CTF 130 |
54 90 54 |
350 350 340 |
140 220 140 |
5.5 5.5 5.5 |
BPC 350 BPC 350 BPC 350K |
| CBF 220 CBF 220H CTF 220 |
72 120 72 |
600 600 590 |
200 300 200 |
8 8 8 |
BPC 600 BPC 600 BPC 600K |
Notes:
1. CBF - Bale out model CTF - Tilting model
2. Theoretical rates - may vary depending upon operating conditions.
3. Maximum temperature 1200 C (allow 200 C head above desired melt temperature).
